;

Biomolecular Engineering and Bioinformatics B.S.

Information and Policies

Introduction

The biomolecular engineering and bioinformatics major includes the biomolecular engineering (BME) and bioinformatics (BINF) concentrations. The BME concentration is designed for students interested in protein engineering, stem cell engineering, and synthetic biology. The emphasis is on designing biomolecules (DNA, RNA, proteins) and cells for particular functions, and the underlying sciences are biochemistry and cell biology.

The BINF concentration combines mathematics, science, and engineering to explore and understand biological data from high-throughput experiments, such as genome sequencing, gene-expression chips, and proteomics experiments. The program builds upon the research and academic strengths of the faculty in the Biomolecular Engineering Department.

In both concentrations, students participate in a capstone experience. Options for the senior capstone experience include

  • Senior Design—a three-quarter group project intended to prepare students for work in industry,
  • a summer full-time synthetic biology project based on the iGEM competition,
  • A three-quarter Senior thesis,
  • or an Advanced bioinformatics course series. The last option is the required capstone for students participating in the bioinformatics concentrations.

All capstone options involve working closely with faculty and other researchers at UCSC, analyzing ideas, developing technologies, and discovering new approaches. Application areas include biomolecular sensors and systems, nano-electronic implants, assistive technologies for the elderly and disabled, bioinformatics, microfluidics, nanoscale biotechnology, environmental monitoring, and other areas at the junction between engineering and the life sciences.

More information about bioengineering research and undergraduate research opportunities can be found at Undergraduate Research Opportunities, the Genomics Institute, the Program in Biomedical Sciences and Engineering, the STEM Maximizing Access to Research Careers (MARC) program, and the STEM diversity programs.

The program has course requirements in mathematics, science, and engineering. Students interested in Biomolecular Engineering and Bioinformatics as a major should contact the School of Engineering advising office (bsoeadvising@ucsc.edu) before enrolling in any courses at UCSC. Early advising is particularly important before choosing calculus and physics courses.

Biomolecular engineering and bioinformatics students may continue their research and studies at UCSC in any of several graduate programs. Information may be found at the Division of Graduate Studies website.

The immense growth of biological information stored in computerized databases has led to a critical need for people who can understand the languages, tools, and techniques of statistics, science, and engineering. A classically trained scientist may be unfamiliar with the statistical and algorithmic knowledge required in this field. A classically trained engineer may be unfamiliar with the chemistry and biology required in the field. Thus, this major strives for a balance of the two: an engineer focused on the problems of the underlying science or, conversely, a scientist focused on the use of engineering tools for analysis and discovery.

Academic Advising for the Program

The Baskin School of Engineering Undergraduate Advising office offers general advising for prospective and declared undergraduates majoring in School of Engineering programs. The office handles major declarations, transfer credits, course substitutions, articulations, and degree certifications. Undergraduate students obtain and submit all paperwork requiring departmental approval to the undergraduate advising office. Transfer students should also refer to the Transfer Information and Policy section.

Baskin Engineering Building, Room 225
bsoeadvising@ucsc.edu
(831) 459-5840

Getting Started in the Major

Students applying for admission as first-year students proposing to take the biomolecular engineering and bioinformatics major should have completed four years of high school mathematics (through advanced algebra and trigonometry) and three years of science, including one year of chemistry and one year of biology. Comparable college mathematics and science courses completed at other institutions may be accepted in place of high school preparation. Students without this preparation may be required to take additional courses to prepare themselves for the program.

Program Learning Outcomes

A biomolecular engineering and bioinformatics student completing the program should:

  • have a broad knowledge of science and engineering disciplines including biology, chemistry, mathematics, statistics, and computer science; those completing the BINF concentration will also have a detailed knowledge of mathematics, statistics, and computer science; and, those completing the BME concentration will have broader knowledge in biology and chemistry;
  • be able to apply their knowledge to identify, formulate, and solve engineering design problems;
  • be able to write programs in Python;
  • be able to find and use information from a variety of sources, including books, journal articles, online encyclopedias, and manufacturer data sheets;
  • be able to design and conduct experiments, as well as to analyze and interpret data;
  • be able to work effectively with partners and on teams;
  • be able to communicate problems, experiments, and design solutions in writing, orally, and as posters; and
  • be able to apply ethical reasoning to make decisions about engineering methods and solutions in a global, economic, environmental, and societal context.

Major Qualification Policy and Declaration Process

Major Qualification

In order to be admitted into the biomolecular engineering and bioinformatics major students must be listed as a proposed major within the School of Engineering. Please refer to the School of Engineering's "Proposed Major Retention" and its "Declaring a School of Engineering Major" sections in the catalog and the Undergraduate Affairs website for more information.

In addition to being listed as a proposed School of Engineering major, students must have completed at least 45 credits with a GPA of 2.8 or better in courses required for the major. Students with more than 7 credits of grades of NP, C-, D+, D, D-, or F in these courses are not qualified for the major.

Students wishing to declare the biomolecular engineering and bioinformatics major after the sixth quarter must appeal, must already have a declared major in which they have completed at least one major requirement course and be making reasonable progress, and must have completed 10 more credits of required courses in the biomolecular engineering and bioinformatics major for each additional quarter.

Transfer students should refer to the Transfer Information and Policy section.

Appeal Process

Students who are informed that they are not eligible to declare may appeal this decision by submitting a letter to the undergraduate director within 15 days from the date the notification was mailed. Within 15 days of receipt of the appeal, the Undergraduate Advising office will notify the student, the college, and the Office of the Registrar of the decision.

If you have further questions concerning the appeal process, please contact the Undergraduate Advising office at (831) 459-5840 or email bsoeadvising@ucsc.edu.

More information is available regarding the appeal process.

 

How to Declare a Major

Instructions for declaring a major in the Baskin School of Engineering are on the division's website here.

Transfer Information and Policy

Transfer Admission Screening Policy

Transfer students need to complete the equivalents of eight courses from the following list with a GPA in those courses of 2.8 or better:

BME 80G
/PHIL 80G
Bioethics in the 21st Century: Science, Business, and Society

5

CHEM 1AGeneral Chemistry

5

CHEM 1BGeneral Chemistry

5

CHEM 1CGeneral Chemistry

5

CHEM 8AOrganic Chemistry

5

CHEM 8BOrganic Chemistry

5

BIOL 20ACell and Molecular Biology

5

MATH 19ACalculus for Science, Engineering, and Mathematics

5

MATH 19BCalculus for Science, Engineering, and Mathematics

5

AM 10Mathematical Methods for Engineers I

5

Although not required for admission, transfer students are strongly recommended to complete at least ten courses from the above list if they wish to graduate in two years.  Students with fewer than 10 transferable courses may find it difficult to complete the major in only two more years.

Prospective students are encouraged to prioritize required and recommended major preparation, and may additionally complete courses that articulate to UC Santa Cruz general education requirements as time allows.

Transferring to Biomolecular Engineering

Students transferring into the biomolecular engineering concentration may also count any of the following:

PHYS 5AIntroduction to Physics I

5

PHYS 5BIntroduction to Physics II

5

BME 21LIntroduction to Basic Laboratory Techniques

3

AM 20Mathematical Methods for Engineers II

5

Transferring to Bioinformatics

Students transferring into the bioinformatics concentration may also count any of the following:

CSE 16Applied Discrete Mathematics

5

CSE 13SComputer Systems and C Programming

7

CSE 30Programming Abstractions: Python

7

Transfer students may use courses articulated to PHIL 22, PHIL 24, or PHIL 28 in place of BME 80G, if these courses are taken prior to registering at UC Santa Cruz.

Getting Started at UCSC as a Transfer Student

Transfer students should declare their major in their first quarter at UCSC. Instructions for declaring a major in the Baskin School of Engineering are at https://undergrad.soe.ucsc.edu/declare-your-major.

Letter Grade Policy

The Baskin School of Engineering requires letter grades for all courses in an engineering major.  

Course Substitution Policy

Please refer to the Undergraduate Affairs course substitution website for Baskin School of Engineering policies about taking courses at other institutions after enrolling at UCSC.

Double Majors and Major/Minor Combinations Policy

Double majors with other biology-related majors are permitted for the bioinformatics concentration, but not for the biomolecular engineering concentration.

The BMEB major cannot be combined with a bioinformatics minor.

Study Abroad

Students are encouraged to investigate studying for short periods of time (a summer or a quarter) at other institutions, to broaden their education.

The BME Department has established an exchange program with Danish Technical University (DTU), which makes study there for one semester relatively easy, particularly for the bioinformatics concentration. Proposed plans of study should still be cleared with the undergraduate director.

Other exchange programs are also being developed.

Honors

Biomolecular engineering and bioinformatics majors are considered for "Honors in the Major" and "Highest Honors in the Major" based on their GPA and on results of undergraduate research. Students with a GPA of 3.7 or higher receive "Highest Honors in the Major." Students with a GPA of 3.3 or higher, but lower than 3.7, receive "Honors in the Major." Students with particularly significant accomplishments in undergraduate research may receive honors or highest honors with a lower GPA. Students who have been found guilty of academic misconduct are not eligible for either honors or highest honors.

Because of the enormous breadth of requirements, biomolecular engineering and bioinformatics majors are urged to take honors courses or sections whenever possible to get as much as possible out of the courses they take in each field.

Biomolecular Engineering Concentration

The biomolecular engineering concentration focuses on wet-lab work, but with a modern appreciation for the statistics and computational tools needed for high-throughput experimentation.

Course Requirements

Biomolecular engineering concentration majors must complete the following courses:

Lower-Division Courses

Biology

All of the following courses:

BIOL 20ACell and Molecular Biology

5

Biology laboratory course

Either of the following courses:

BIOL 20LExperimental Biology Laboratory

2

BME 21LIntroduction to Basic Laboratory Techniques

3

BME 21L is strongly preferred.

This requirement is waived for transfer students with biotechnology or molecular biology lab experience—students can request the waiver from the undergraduate director.

Bioethics
BME 80G
/PHIL 80G
Bioethics in the 21st Century: Science, Business, and Society

5

Chemistry

All of the following courses:

CHEM 1AGeneral Chemistry

5

CHEM 1BGeneral Chemistry

5

CHEM 1MGeneral Chemistry Laboratory

2

CHEM 1CGeneral Chemistry

5

CHEM 1NGeneral Chemistry Laboratory

2

CHEM 8AOrganic Chemistry

5

CHEM 8BOrganic Chemistry

5

Laboratory courses

One of the following options:

Either these courses

BME 22LFoundations of Design and Experimentation in Molecular Biology, Part I

2

BME 23LFoundations of Design and Experimentation in Molecular Biology, Part II

2

or these courses

CHEM 8LOrganic Chemistry Laboratory

2

CHEM 8MOrganic Chemistry Laboratory

2

BME 22L and BME 23L are strongly preferred.

Mathematics

Choose one of the following options:

Either these courses

MATH 20AHonors Calculus

5

MATH 20BHonors Calculus

5

or these courses

MATH 19ACalculus for Science, Engineering, and Mathematics

5

MATH 19BCalculus for Science, Engineering, and Mathematics

5

MATH 19A and MATH 19B are the recommended sequence. Credit for one or both can be granted with adequate performance on the College Entrance Examination Board (CEEB) calculus AB or BC Advanced Placement examination.

Applied Math

Both of these applied math courses:

AM 10Mathematical Methods for Engineers I

5

AM 20Mathematical Methods for Engineers II

5

Students may substitute MATH 21 for AM 10,  and MATH 24 for AM 20, if they can show MATLAB proficiency at the level of students in the AM class that they are replacing.

Physics

All of the following courses:

PHYS 5AIntroduction to Physics I

5

PHYS 5LIntroduction to Physics I Laboratory

1

PHYS 5BIntroduction to Physics II

5

PHYS 5MIntroduction to Physics II Laboratory

1

Upper-Division Courses

Statistics

Two statistics courses:

STAT 131Introduction to Probability Theory

5

AND

Either one of these courses

STAT 132Classical and Bayesian Inference

5

STAT 206Applied Bayesian Statistics

5

Biochemistry and Molecular Biology

All of the following courses:

BIOC 100ABiochemistry and Molecular Biology

5

BIOC 100BBiochemistry and Molecular Biology

5

Biomolecular Engineering
Choose one of the following courses:
BME 105Genetics in the Genomics Era

5

BIOL 105Genetics

5

BME 105 is strongly recommended.

Plus all of the following courses:
BME 110Computational Biology Tools

5

BME 160Research Programming in the Life Sciences

6

BME 163Applied Visualization and Analysis of Scientific Data

3

Plus one of the following Modeling/Design sequences:
Either these courses

BME 128Protein Engineering

5

BME 128LProtein Engineering Laboratory

2

or these courses

BME 177Engineering Stem Cells

5

BME 128LProtein Engineering Laboratory

2

or these courses

AM 115Stochastic Modeling in Biology

5

Technical Writing (one of the following courses)
BME 185Technical Writing for Biomolecular Engineers

5

CSE 185E
/CSE 185S
Technical Writing for Computer Science and Engineering

5

BME 185 is recommended, as CSE 185E has additional prerequisites.

Elective

One of the following (the course taken to satisfy this elective cannot be used to satisfy other requirements of the major):

AM 147Computational Methods and Applications

5

METX 119Microbiology

5

METX 140Molecular Biology and Microbial Genetics

5

BIOC 100CBiochemistry and Molecular Biology

5

BIOL 115Eukaryotic Molecular Biology

5

BME 122HExtreme Environmental Virology

5

BME 128Protein Engineering

5

BME 128LProtein Engineering Laboratory

2

BME 130Genomes

5

BME 132Evolutionary Genomics

5

BME 140Bioinstrumentation

5

BME 175Entrepreneurship in Biotechnology

5

BME 177Engineering Stem Cells

5

BME 178Stem Cell Biology

5

ECE 104Bioelectronics

5

or any 5-credit biomolecular engineering graduate course

Disciplinary Communication (DC) Requirement

Students of every major must satisfy that major's upper-division Disciplinary Communication (DC) requirement. Biomolecular engineering and bioinformatics majors satisfy the DC requirement by completing one of the following courses:

BME 185Technical Writing for Biomolecular Engineers

5

CSE 185E
/CSE 185S
Technical Writing for Computer Science and Engineering

5

BME 185 is recommended, as CSE 185E has additional prerequisites.

Comprehensive Requirement

All biomolecular engineering concentration students must complete a senior capstone project as a group project, as a series of Advanced Bioinformatics courses, or as an individual senior thesis doing research in a faculty laboratory.

Note that the Technical Writing requirement is a prerequisite for all the capstone options, including the senior thesis. Students pursuing the senior thesis option must write a two-page thesis proposal and seek approval of their project from the undergraduate director in the quarter preceding the independent study courses, typically spring quarter of the third year. Students are responsible for ensuring that they meet the prerequisites for whichever capstone they choose.

To complete the senior capstone requirement, Biomolecular Engineering concentrations students must complete one of the following:

Either these courses

BME 129AProject Design and Implementation in Biomolecular Engineering I

5

BME 129BProject Design and Implementation in Biomolecular Engineering II

5

BME 129CProject Design and Implementation in Biomolecular Engineering III

5

or these courses

BME 180Professional Practice in Bioengineering

2

BME 188ASynthetic Biology--Mentored Research A

2

BME 188BSynthetic Biology--Mentored Research B

5

BME 188CSynthetic Biology Mentored Research C

5

or these courses

BME 205Bioinformatics Models and Algorithms

5

BME 230AIntroduction to Computational Genomics and Systems Biology

5

or these courses

BME 193Field Study

5

BME 123TSenior Thesis Writing

5

or these courses

BME 195Senior Thesis Research

5

BME 123TSenior Thesis Writing

5

or these courses

BME 198Individual Study or Research

5

BME 123TSenior Thesis Writing

5

The thesis option consists of 12 credits of Independent Study (BME 198). Field Study (BME 193), or Senior Thesis Research (BME 195) in biomolecular engineering; and BME 123T, Senior Thesis Presentation, 5 credits.

Students pursuing the senior thesis option must write a two-page thesis proposal and seek approval of their project from the undergraduate director in the quarter preceding the independent study courses, typically spring quarter of the third year.

Students spend three or more quarters working on their thesis projects. Thesis students must enroll in BME 123T, Senior Thesis Presentation, before completing their thesis.

Exit Requirements

Students are required to submit a portfolio, exit survey, and attend an exit interview.

The portfolios must be turned in electronically as PDF files by the last day of the quarter of graduation, and will be reviewed quarterly by the undergraduate director.

Portfolios must contain the following:

  • A substantial written report on a modeling/design project. This is typically satisfied by a senior thesis, or a written capstone project report.
  • Slides from a substantial verbal presentation. This is typically satisfied by a capstone design presentation, Stem Cell Engineering, or other design courses.
  • A research poster. This is typically satisfied by a senior thesis poster or a capstone design project poster, presented at the undergraduate poster symposium.

The three parts of the portfolio should represent at least two different design projects. If a senior thesis is completed, it must be provided as the written report.  If a capstone project is completed, it must be provided as one (or more) of the three submissions.

Exit interviews are scheduled during the last week of the quarter by the Baskin School of Engineering (BSOE) advising office, generally as small group interviews.

Planners

Every biomolecular engineering and bioinformatics major must have a faculty advisor, assigned by the Baskin School of Engineering undergraduate advising office, and with that advisor must formulate a program of proposed coursework that meets the major requirements.  The choice of capstone and electives should be made early, so that the plan can be tailored to fit in the chosen courses.

As in all engineering and science programs, it is recommended that students spread their general education requirements out over all 12 quarters. Delaying a general education requirement is safer than delaying a major requirement.

It is recommended that students reserve the summer after the junior year for undergraduate research.

Curriculum charts for the major are available on the BSOE website.

Sample Plan: Biomolecular Engineering Concentration

Year Fall Winter Spring
1st (frosh) CHEM 1A MATH 19B AM 10
MATH 19A CHEM 1B & CHEM 1M CHEM 1C & CHEM 1N
    BME 21L
2nd (soph) BME 22L BME 23L BME 105
CHEM 8A CHEM 8B PHYS 5B & PHYS 5M
BIOL 20A PHYS 5A & PHYS 5L  
  AM 20  
3rd (junior) BIOC 100A BIOC 100B AM 115
BME 110 BME 160  BME 163
BME 185 STAT 131  
4th (senior) BME 129A BME 129B BME 129C
BME 80G STAT 132 Elective

Students who can take Organic Chemistry (CHEM 8A and CHEM 8B, or transferable equivalents) in summer after their first year can take BIOC 100A in their second year and be ready to join a research lab a year earlier. Here is an alternative plan for students who do organic chemistry in summer.

Sample Plan: Biomolecular Engineering Concentration (CHEM 8A & CHEM 8B In summer after first year)

Year Fall Winter Spring
1st (frosh) CHEM 1A MATH 19B BIOL 20A
MATH 19A CHEM 1B & CHEM 1M CHEM 1C & CHEM 1N
    BME 21L
2nd (soph) BME 22L BME 23L BME 105
BIOC 100A BIOC 100B PHYS 5B & PHYS 5M
BME 80G PHYS 5A & PHYS 5L  
3rd (junior) BME 185 AM 20  
BME 110 BME 160 BME 163
AM 10    
4th (senior) BME 129A BME 129B BME 129C
STAT 131 STAT 132 Elective
    AM 115

General education requirements: 

CC, ER, and IM are not met by any courses in the program.

MF, SI, SR and PE are met by required courses.

TA can be met by several electives: BME 122H, BME 132, BME 177, or BME 178.

PR-E can be met by some capstone options: BME 129C or BME 180.

C is not met by courses in the program, but is a prerequisite for the required BME 185 or CSE 185E course.

Transfer planner

Year Fall Winter Spring
1st (junior) BIOC 100A BIOC 100B BME 105
BME 80G BME 110 BME 160
BME 185 AM 20 PHYS 5B & PHYS 5M
BME 22L BME 23L

 

2nd(senior) BME 129A BME 129B BME 129C
STAT 131 STAT 132 BME 163
Elective   AM 115

This transfer planner assumes that a student has completed the equivalent of CHEM 1A, CHEM 1B, CHEM 1M, CHEM 1C, CHEM 1N, CHEM 8A, CHEM 8B, MATH 19A, MATH 19B, PHYS 5A, PHYS 5LBIOL 20AAM 10, a molecular biology lab, and all general education courses before coming to UC Santa Cruz. Students are also expected to have completed all the general education requirements, except those covered by the required courses. This planner is only a proof-of-concept that the major can be completed in another two years; each student will need to work with an advisor to tailor their own schedule.

Bioinformatics Concentration

The bioinformatics concentration focuses on dry-lab (computational) techniques.

Bioinformatics concentration majors must complete the following courses:

Course Requirements

Lower-Division Courses

Biology
BIOL 20ACell and Molecular Biology

5

Biomolecular Engineering
BME 80G
/PHIL 80G
Bioethics in the 21st Century: Science, Business, and Society

5

Chemistry

All of the following courses:

CHEM 1AGeneral Chemistry

5

CHEM 1BGeneral Chemistry

5

CHEM 1MGeneral Chemistry Laboratory

2

CHEM 1CGeneral Chemistry

5

CHEM 1NGeneral Chemistry Laboratory

2

CHEM 8AOrganic Chemistry

5

CHEM 8BOrganic Chemistry

5

Computer Science and Engineering

All the following courses:

CSE 13SComputer Systems and C Programming

7

CSE 16Applied Discrete Mathematics

5

CSE 30Programming Abstractions: Python

7

CSE 101Introduction to Data Structures and Algorithms

5

BME 160 is prerequisite to both CSE 13S and CSE 30.

Mathematics
Choose one of the following options:
Either these courses

MATH 20AHonors Calculus

5

MATH 20BHonors Calculus

5

AM 10Mathematical Methods for Engineers I

5

or these courses

MATH 19ACalculus for Science, Engineering, and Mathematics

5

MATH 19BCalculus for Science, Engineering, and Mathematics

5

AM 10Mathematical Methods for Engineers I

5

MATH 19A and MATH 19B are the recommended sequence. Credit for one or both can be granted with adequate performance on the College Entrance Examination Board (CEEB) calculus AB or BC Advanced Placement examination. 

Students may substitute MATH 21 for AM 10, if they can show MATLAB proficiency at the level of students in the AM class.

Upper-Division Courses

Statistics

Two statistics courses:

STAT 131Introduction to Probability Theory

5

AND

Either one of these courses

STAT 132Classical and Bayesian Inference

5

STAT 206Applied Bayesian Statistics

5

Biochemistry and Molecular Biology
BIOC 100ABiochemistry and Molecular Biology

5

Biomolecular Engineering
Plus one of the following courses:
BME 105Genetics in the Genomics Era

5

BIOL 105Genetics

5

BME 105 is strongly recommended.

Plus all of the following courses:
BME 110Computational Biology Tools

5

BME 160Research Programming in the Life Sciences

6

BME 163Applied Visualization and Analysis of Scientific Data

3

Plus one of the following Modeling/Design sequences:
Either these courses

AM 20Mathematical Methods for Engineers II

5

AM 115Stochastic Modeling in Biology

5

or these courses

AM 30Multivariate Calculus for Engineers

5

CSE 142Machine Learning

5

or these courses

AM 30Multivariate Calculus for Engineers

5

CSE 144Applied Machine Learning

5

Students may substitute  MATH 24 for AM 20, and MATH 22 or MATH 23A for AM 30 , if they can show MATLAB proficiency at the level of students in the AM class that they are replacing.

Technical Writing

Choose one of the following courses:

BME 185Technical Writing for Biomolecular Engineers

5

CSE 185E
/CSE 185S
Technical Writing for Computer Science and Engineering

5

CSE 185E is recommended, as it has more focus on writing about computer programming and includes some LaTeX instruction.

Elective

One of the following (courses satisfying an elective cannot be used to satisfy other requirements of the major):

AM 147Computational Methods and Applications

5

BME 122HExtreme Environmental Virology

5

BME 128Protein Engineering

5

BME 128LProtein Engineering Laboratory

2

BME 130Genomes

5

BME 132Evolutionary Genomics

5

BME 140Bioinstrumentation

5

BME 175Entrepreneurship in Biotechnology

5

BME 177Engineering Stem Cells

5

BME 178Stem Cell Biology

5

BIOC 100BBiochemistry and Molecular Biology

5

CSE 142Machine Learning

5

CSE 144Applied Machine Learning

5

METX 119Microbiology

5

METX 140Molecular Biology and Microbial Genetics

5

or any 5-credit biomolecular engineering graduate course

Database management

The following course is required:

CSE 182Introduction to Database Management Systems

5

CSE 180 may be substituted for CSE 182, but BMEB students do not have registration priority.

Disciplinary Communication (DC) Requirement

Students of every major must satisfy that major's upper-division Disciplinary Communication (DC) requirement. Biomolecular engineering and bioinformatics majors satisfy the DC requirement by completing one of the following courses:

BME 185Technical Writing for Biomolecular Engineers

5

CSE 185E
/CSE 185S
Technical Writing for Computer Science and Engineering

5

Comprehensive Requirement

The senior capstone is fulfilled by completing all of the following courses:

BME 205Bioinformatics Models and Algorithms

5

BME 230AIntroduction to Computational Genomics and Systems Biology

5

Exit Requirements

Students are required to submit a portfolio, exit survey, and attend an exit interview.

The portfolios must be turned in electronically as PDF files by the last day of the quarter of graduation, and will be reviewed quarterly by the undergraduate director.

Portfolios must contain the following:

  • A substantial written report on a modeling/design project. This is typically satisfied by a senior thesis, or a written capstone project report.
  • Slides from a substantial verbal presentation. This is typically satisfied by a capstone design presentation, Stem Cell Engineering, or other design courses.
  • A research poster. This is typically satisfied by a senior thesis poster or a capstone design project poster, presented at the undergraduate poster symposium.

The three parts of the portfolio should represent at least two different design projects. If a senior thesis is completed, it must be provided as the written report. If a capstone project is completed, it must be provided as one (or more) of the three submissions.

Exit interviews are scheduled during the last week of the quarter by the Baskin School of Engineering (BSOE) advising office, generally as small group interviews.

Planners

Every biomolecular engineering and bioinformatics major must have a faculty advisor, assigned by the Baskin School of Engineering undergraduate advising office, and with that advisor must formulate a program of proposed coursework that meets the major requirements.  The choice of capstone and electives should be made early, so that the plan can be tailored to fit in the chosen courses.

As in all engineering and science programs, it is recommended that students spread their general education requirements out over all 12 quarters. Delaying a general education requirement is safer than delaying a major requirement.

It is recommended that students reserve the summer after the junior year for undergraduate research.

Curriculum charts for the major are available on the BSOE website.

Sample Plan: Bioinformatics Concentration

Year Fall Winter Spring

1st (frosh)

CHEM 1A CHEM 1B & CHEM 1M BIOL 20A
MATH 19A MATH 19B CHEM 1C & CHEM 1N
     

2nd (soph)

CHEM 8A CHEM 8B BME 105
AM 10 CSE 16 BME 160
BME 80G   AM 30
3rd (junior) BIOC 100A CSE 13S BME 163
STAT 131 STAT 132 CSE 101
CSE 30   CSE 182
4th (senior) BME 205 BME 230A Elective
  BME 110 CSE 185E CSE 144
       

General education requirements:

CC, ER, IM, and PR-E are not met by any courses in the program.

MF, PE-T, SI, and SR are met by required courses.

TA can be met by several electives: BME 122H, BME 132, BME 177, or BME 178.

C is not met by courses in the program, but is a prerequisite for the required BME 185 or CSE 185E course.

Transfer planner

Year  Fall Winter  Spring 
3rd
(junior)
BIOC 100A BME 110 BME 105
AM 10 BME 160 BME 163
STAT 131 STAT 132 CSE 30
4th
(senior)
BME 205 BME 230A

Elective

BME 80G CSE 185E CSE 182
CSE 101 CSE 144 AM 30

This transfer planner assumes that a student has completed the equivalent of CHEM 1A, CHEM 1B, CHEM 1M, CHEM 1C, CHEM 1N, CHEM 8A, CHEM 8B, MATH 19A, MATH 19B, BIOL 20A, CSE 16, and  CSE 13S and all general education requirements, except those covered by the required courses. This planner is only a proof-of-concept that the major can be completed in another two years; each student will need to work with an advisor to tailor their own schedule.